In the process of rebuilding several Model A distributors, I have developed a workstand which shaft is proven by removal (or be helpful). The distributor can be mounted at a vertical position of a shelf securely ~4". A second use of a larger hole. When drilled on the top of the upright to the distributor is held index pin and will not turn during restoration. A whole screw can be constructed. It may not revolutionize the hobby, but does glue this lot more convenient!
Distributor Workstand
[Diagram descriptions: Side view with wood base, vertical post drilled at top, distributor mounted; front view showing supports.]
Submitted by Donald R. Gredig, Summit, New Jersey.
